DAWSIL

Silicone adhesive

Solicita oferta

DOWSIL

Silicone adhesive

DOW Silicones delivers a wide variety of silicone-based polymers

DOW Silicones

DOW Silicones (formerly Dow Corning) delivers a wide variety of silicone-based polymers for diverse solutions in electric, electronic and energy applications. DOWSIL™ silicone adhesives are used primarily to attach components, such as module lids and baseplates, within electronic modules or seal openings in the module to exclude dirt, water or other contaminants. A key benefit of silicone adhesives is their potential to significantly increase the reliability of an electronic module or component because of their stress-relieving properties. The adhesives in our portfolio have a “rubbery”, elastomeric nature and are not conventional, highly rigid adhesives. This low-stress environment can reduce damage to module components and interconnections. They are also able to maintain their stress-relieving nature throughout exposure to extreme environmental conditions such as high temperature and humidity. DOWSIL™ silicone adhesives also offer versatile processing. Some are cured at room temperature, while others can be accelerated by heat. This can allow faster process times or the use of lower temperature capable materials, depending on the needs of your application and process. More recently developed products are resulting in even faster and lower temperature curing capability. The line of adhesives available is also offered in a range of flow properties to fill gaps and channels, or to remain in place as the application requires. Many of the flowable products will self-level to fill channels and cavities.

These one-part adhesives utilise moisture from the atmosphere for curing. They are supplied ready-to-use and require no mixing equipment or ovens. The assembled parts can simply be set aside at normal room environments. Parts can be handled in 10-120 minutes and achieve full properties in 24-72 hours, depending on the product utilised and its bond line thickness. Some of our newer products are formulated for faster room temperature cures. Because these products require moisture from the outside, they are not suitable for highly confined or deep-section curing. Some acceleration of curing can be accomplished with mild heating at temperatures not exceeding 60 °C.  

Vrei să aflii mai multe despre DOWSIL?

Contactează unul dintre reprezentanții noștri locali pentru detalii și o ofertă personalizată.

Sunt de acord ca datele mele cu caracter personal să fie prelucrate de Performance Lubricants, în conformitate cu politica de protecție a datelor, în scopul de a-mi oferi și comunica informațiile solicitate.