Vertrel™ specialty fluid
Vertrel™ X-P10 specialty fluid
Vertrel™ X-P10 specialty fluid is a special solvent blend of Vertrel™ XF and isopropanol. It is specially designed to improve solvency for polar solids.
Download the product brochure for Vertrel™ specialty fluids.
Vertrel™ X-P10 is widely used for the following applications:» Carrier Fluid/Lubricant Deposition
» Drying/Rinsing Agent
» Light Soil Removal
Compatibility and Soils
Vertrel™ X-P10 specialty fluid is compatible with most plastics and elastomers. Vertrel™ X-P10 can be used to clean a wide variety of soils including flux residue, cutting oils, gear oils, heavy greases, hydraulic oils, stamping oils, synthetic oils, vacuum oils, waxes, and mineral oils.
To check materials compatibility and determine if Vertrel™ X-P10 is the optimum solution, please contact us.
Vertrel™ has zero ozone-depletion potential. It is used extensively to replace CFC-113, methyl chloroform, hydrochlorofluorocarbons (HCFCs), and perfluorocarbons (PFCs) in several applications. Vertrel™ X-P10 has been accepted by the U.S. Environmental Protection Agency (EPA) under the Significant New Alternatives Policy (SNAP) program, as a substitute for ozone-depleting substances. Vertrel™ X-P10 is not a hazardous air pollutant (HAP) and, therefore, not subject to NESHAP regulations. Spent Vertrel™ X-P10 is not an RCRA characteristic or listed waste. However, addition of contaminants could change that status. Vertrel™ X-P10 is not included in the SARA Title III Section 313 list of toxic chemicals, and is not subject to SARA Title III (EPCRA) reporting requirements. The components of Vertrel™ X-P10 are listed in the TSCA inventory. One component, HFC-43-10mee, is subject to the Significant New Use Rule (SNUR) and should be used only in the applications indicated in the Vertrel™ X-P10 Safety Data Sheet regulatory section.
Flammability and Toxicity
Vertrel™ X-P10 specialty fluid exhibits no closed-cup flash point in accordance with the Tag Closed Cup Tester (ASTM D-56) and is not classified as a flammable liquid by NFPA or DOT. However, the product does exhibit vapor flammability limits in air. Users should clear equipment of all vapors and liquids before performing any maintenance operations that may result in an ignition source.
Flash point data and limits of flammability in air provide the user with additional information that should be used as elements of a fire risk assessment and to determine guidelines for safe handling of volatile chemicals. Users should ensure compliance with NFPA standards and local fire codes.
Acute toxicity studies show that Vertrel™ X-P10 has low toxicity. It is a slight skin and eye irritant and has low inhalation toxicity. For exposure limits, please refer to the Vertrel™ X-P10 brochure.
» Vertrel™ X-P10 Safety Data Sheet
» Vertrel™ X-P10
» Vertrel™ specialty fluid